Home > Products>Manual Feed Drilling & Tapping Machine>BELT DRIVE - Manual Feed Variable Speed Drilling & Tapping Machine >JS-20VTI
LOADING IMAGES
JS-20VTI
.jpg)
Drilling：Ø20MM
Tapping ：M3-M10
Variable Speed
50Hz：150~2500 rpm
Spindle speed display
| Drilling capacity | Ø 3MM ~ Ø 20MM | ||
| Tapping capacity | Seel | M3 - M10 | |
| Cast iron | M3 - M12 | ||
| Spindle taper | MT2 | ||
| Spindle speed, rpm | 150 - 2500 | ||
| Number of speeds | Variable Speeds | ||
| Spindle travel | 90MM | ||
| Swing | 360MM | ||
| Column diameter | Ø 80MM | ||
| Table size, mm | T280 × 280MM | ||
| T-Slot Size | 12MM | ||
| Vise Jaw opening × Width × Height | NA | ||
| Base size, mm | T470 × 280 MM | ||
| Pump motor | NA | ||
| Spindle motor | 0.75kW (1HP) | ||
| CE electrics | NA | ||
| Voltage | 230V | ||
| Spindle Nose To Table | 420MM | ||
| Spindle Nose To Base | 645MM | ||
| Packing dimension, mm (thick carton) | 810 × 360 × 1280MM / 13Cuft | ||
| Net weight, Kgs | N.W-103Kg / G.W-115Kg | ||
| 20' FCL | 42 Sets | ||
| Packing cartons per machine | 1 | ||
| Pigment | RAL 5015 + RAL 7001 | ||
 |
Dimensions(m/m) | |
| JS-20VTI | ||
| A | 1085 | |
| B | 472 | |
| C | C=470 × c1=280 | |
| D | D=280 × d1=280 | |
| E | Max 420 | |
| F | Max 645 | |
| G | 732 | |
| H | 180 | |
| I | Ø80 | |
| T | 12 | |
Standard Accessories
 |
 |
| Wedge | Chuck guard (for CE) |
Optional Accessories
 |
 |
.jpg) |
 |
 |
| MT2 chuck arbor | Drill chuck | Tapping chuck | 52-Pc Steel Clamping Kit | Work Lamp |
Packing
Instructions for
1. JS-20VTI series employ an AC inverter-duty motor combined with an inverter in functioning a stepless variable-spindle-speed change. It is easy to reach the required main spindle speed by lightly turning the speed controller without adjusting the belt. Thus, it is able to increase efficiency and reduce cost. And, it can also perform high torsion at a low spindle speed.
2. JS-20VTI series both have an attached main spindle speed meter on them which can show the speed of main spindle exactly.
3. JS-20VTI series are precise constructions and patterned designs. As an accident occurs in process of the tapping stroke, just use one hand to lightly push the grip handle backward so that the machine can return back the knife immediately to avoid the tapping tip being broken. They are safe and reliable.
4. All exported machines are assembled with vertical type and packed into heavy-duty cardboard boxes individually according to the environmental protection of packaging practice.