Home > Products>Manual Feed Drilling Machine>BELT DRIVE - Manual Feed Variable Speed Drilling Machine >JS-16V
LOADING IMAGES
JS-16V
.jpg)
Drill capacity：Ø16MMVariable Speed / 230V
50Hz：350~2500 rpm
Spindle speed display
| Drilling capacity | Ø 3MM ~ Ø16MM | ||
| Spindle taper | MT2 | ||
| Spindle speed, rpm | 350 - 2500 | ||
| Number of speeds | Variable Speeds | ||
| Spindle travel | 90MM | ||
| Swing | 360MM | ||
| Column diameter | Ø 80MM | ||
| Table size, mm | T 280 × 280MM,Ø 320 | ||
| T-Slot Size | 12MM | ||
| Base size, mm | T 470 × 280MM / 505 × 305MM | ||
| Spindle motor | DC 1200W (1-1/2HP) | ||
| Voltage | 230V 1Ph | ||
| Spindle Nose To Table | 420MM | ||
| Spindle Nose To Base | 645MM | ||
| Packing dimension, mm (carton) | 830 × 510 × 300MM / 4.5 Cuft | ||
| Net weight, Kgs | N.W -88Kg / G.W -91Kg | ||
| 20' FCL | 224 Sets | ||
| Packing dimension, mm (wooden crate) | 760 × 420 × 1250MM / 13.8 Cuft | ||
| Net weight, Kgs | N.W-88Kg / G.W-118Kg | ||
| 20' FCL | 42 Sets | ||
| Packing cartons per machine | 1 | ||
| Pigment | RAL 5015 + RAL 7001 |
 |
Dimensions(m/m) | |
| JS-16V | ||
| A | 1080 | |
| B | 470 | |
| C | C=470 × c1=280 | |
| D | D=280 × d1=280 | |
| E | Max 420 | |
| F | Max 645 | |
| G | 600 | |
| H | 180 | |
| I | Ø80 | |
| T | 12 | |
Standard Accessories
 |
 |
| Wedge | Chuck guard (for CE) |
Optional Accessories
 |
 |
 |
 |
 |
| MT2 chuck arbor | Drill chuck | Tapping Attachment | Vise | Work Lamp |
Packing
Instructions for
1. By adopting a DC carbon-brush motor together with a precise electronic controlling board, JS-16V/20V/25V /30VP functions a stepless variable-spindle-speed change. It is easy to reach the required main spindle speed by lightly turning the speed controller without adjusting the belt. Thus, it is able to increase efficiency and reduce cost. And, it can also perform high torsion at a low spindle speed.
2. For economizing on packaging, JS-16V/20V/25V is packed in separate units and then put into a Styrofoam/ cardboard box.