LOADING IMAGES
JS-25V

Drill capacity：Ø25MM
Variable Speed / 400V
50Hz：150~2500 rpmm
Spindle speed display
 
Drilling capacity Ø 3MM ~ Ø 25MM
Spindle taper MT3
Spindle speed, rpm 150  - 2500
Number of speeds Variable Speeds
Spindle travel 125MM
Swing 450MM
Column diameter Ø 92MM
Table size, mm T 350 × 350MM or Ø 400MM
T-Slot Size 12MM
Vise Jaw opening × Width × Height -------
Base size, mm  T 560 × 410 MM
Pump motor -------
Spindle motor DC 1500W (2HP)
Voltage 400V 1Ph
Spindle Nose To Table 705MM
Spindle Nose To Base 1235MM
Net weight, Kgs N.W -146Kg / G.W -154Kg
Packing dimension, mm (carton) Head 800×530×370MM/ 5.6Cuft
Base.Table 650×500×400MM/4.6Cuft
Column 1450×200×200MM/2.2Cuft
20' FCL 95 Sets
Packing cartons per machine 3
Pigment RAL 5015 + RAL 7001


Standard Accessories
Wedge Chuck guard (for CE)


Optional Accessories
MT3 chuck arbor Drill chuck 52-Pc Steel Clamping Kit Tapping Attachment Work Lamp


Packing
​
​

Instructions for
1. By adopting a DC carbon-brush motor together with a precise electronic controlling board, JS-16V/20V/25V /30VP functions a stepless variable-spindle-speed change. It is easy to reach the required main spindle speed by lightly turning the speed controller without adjusting the belt. Thus, it is able to increase efficiency and reduce cost. And, it can also perform high torsion at a low spindle speed.

2. For economizing on packaging, JS-16V/20V/25V is packed in separate units and then put into a Styrofoam/ cardboard box.