LOADING IMAGES
Adjustable Type - U

Model：JU-165(S)/200(S)/250(S)/300(S)

Instruction:
▶ It is an universal adjustable muli-spindle head. the regular spindles from 4-12 spindles,depend on customer's requirement. Special requirement is acceptable.
▶ The universal joint design,it is very to adjust each spindle.
▶ Each spindle adjust range within 30mm around the circuit.


▶ It is a universal adjustable multi-spindle head. The regulur spindle from 4-14 spindles. Depend on customer's requirement. Special requirement is acceptable.
▶ It is suitable to woek for linerials.
▶ The universdal joint design,it is very easy to adjust each spindle.


▶ C=flexible collet / JT=Chuck
Model JU-165 JU-165S JU-200 JU-200S
Collet C-6/C-9/JT1 C-12/JT2/JT6 C-6/C-9/JT1 C12/JT2/JT6
Max.Range of Centers 165 165 200 200
Lowest Distance 18/26 28 18 30
R.P.M 1:1 1:1 1:1 1:1
Max.Drilling Capacity 6/8 11 6/8 11
Spindle 2~10 4~12 4~12 4~12
 
Model JU-250 JU-250S JU-300 JU-300S
Collet C-6/C-9/JT1 C-12/JT2/JT6 C-6/C-9/JT1 C12/JT2/JT6
Max.Range of Centers 250 250 300 300
Lowest Distance 18/26 30 18/26 30
R.P.M 1:1 1:1 1:1 1:1
Max.Drilling Capacity 6/8 11 6/8 11
Spindle 4~12 4~12 4~14 4~14


​​​Collet dimension
▶ CT: For Tapping ( Note:d/ is the diameter of tap shank )

Type ￠dmm ￠Dmm Lmm B Amm Max Clamping Capacity
DT-4 ￠3~￠4 ￠8.2 24 1/4-28UINF 6 M3.5×0.6
CT-5 ￠3~￠5 ￠10.8 31.5 5/16-24UINF 8 M4×0.7
CT-6 ￠3~￠6 ￠13.1 36 3/8-24UINF 10 M6×1.0
CT-9 ￠3~￠7 ￠17 46 1/2-20UINF 14 M8×1.25
CT-12 ￠3~￠9 ￠21 50 5/8-18UINF 17 M12×1.75
CT-14 ￠3~￠12 ￠24.5 54 3/4-16UINF 21 M14×2.0
CT-16 ￠3~￠14 ￠31 70 M24-2.0 26 M18×2.5



▶ C: For Drilling (Note: d/ is the shank diameter of the drill bit (-0.04) such as round rod milling cutter and should be marked )
Type ￠dmm ￠Dmm Lmm B Amm Max Clamping Capacity
D-4 ￠2~￠4 ￠8.2 24 1/4-28UINF 6 ￠4
C-5 ￠2~￠5 ￠10.8 31.5 5/16-24UINF 8 ￠5
C-6 ￠2~￠6 ￠13.1 36 3/8-24UINF 10 ￠6
C-9 ￠2~￠7 ￠17 46 1/2-20UINF 14 ￠9
C-12 ￠3~￠12 ￠21 50 5/8-18UINF 17 ￠12
C-14 ￠5~￠14 ￠24.5 54 3/4-16UINF 21 ￠14
C-16 ￠5~￠16 ￠31 70 M24-2.0 26 ￠16


Dimension of spindle nose


Principal Dimension